Removing
1. Turn off the ignition and remove the key from the lock.
2. Remove the cover from the left side of the instrument panel.
3. Remove the light switch.
4. Release from fastening an overlay over a connecting joint on a steering column.
5. Open document drawer 1 (see illustration). Squeeze the side walls of the drawer, unlocking them, and fully open the drawer.
Pull the box with a certain force deep into the passenger compartment so that it is released from the lower hinges and remove it.
Attention! The steering wheel does not need to be removed.
6. Unscrew screws 2,3 and 4 and remove trim 5 from the instrument panel (see illustration 13.5).
7. Disconnect the headlight range adjustment plug located on the back of the trim strip.
8. Remove the cover under the heater switch box.
9. Remove screws 6, 7, 8 and 9 (see illustration).
Attention! The steering wheel does not need to be removed.
10. Release the panel 10 on the right side using the plastic wedge 11 and remove it (see illustration 13.9).
Installation of a facing overlay of the panel of devices is carried out in sequence, return to removal.
In this case, the fastening screws should be screwed in in the following sequence: 6, 7, 8 and 9 for the right panel and 2, 3 and 4 for the left.
Visitor comments