Air Filter Insert — Replacement (VW Golf 2)

1. A dirty filter insert causes deterioration of engine performance and increases fuel consumption. A new filter insert must be installed every 10,000 km or more often if the car is operated in very dusty conditions.

Engines 1.1 and 1.3 l

2. Release the spring clips securing the air filter cover and remove the cover

3. Cover the carburetor inlet to prevent dirt from getting in and remove the air filter insert. Wipe the inside of the filter with a damp cloth, thoroughly removing dirt and dust, and then remove the cover from the carburetor inlet installed earlier.

4. Cleaning the filter insert from dirt and dust must be done by beating the insert at a safe distance from the car. If necessary, to clean the insert from the outside, you can use a soft brush or blow the insert under high pressure, directing its stream from the inner to the outer surface of the insert.

The original text is available on the website VWmanual.ru

5. Install the insert, clean the cover, place it on the filter body and secure with spring clamps.

Engines 1.6 and 1.8 l

6. Unfasten the spring clips, remove the filter cover and take out the filter insert. It is necessary to pay attention that in some models it is necessary to first unscrew the nut from the front fastening. Inside, clean the air filter with a rag soaked in fuel, and then wipe dry.

7. Assembly is carried out in the reverse order of disassembly.