Contents: Extraction ↓ Installation ↓
Extraction
1. Disconnect the negative battery cable.
2. Disconnect the wires from the radiator fan motor and fan shroud.
3. Unscrew the bolts and screws, remove the casing together with the fan.
4. Unscrew the nuts and remove the fan from the casing (photo 2.12).
(The information is presented on the website: «VWmanual.ru»)
5. If necessary, the fan can be removed from the motor shaft. In AEG motors, knock out the pin, and in Bosch motors, remove the safety ring. Assemble the parts in reverse order, using new fuses.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments