Carefully remove the cover from the back cover.
Remove the three rear window wiper motor retaining screws.
If the back cover has a large cutout, the engine must be removed completely.
If the cover has two small cutouts, you will need to separate the wiper motor, mounting plate and wiper drive, then remove the motor.
Before installing the new motor, let it run as previously described for the windshield motor.
Securely fasten the wiper arm. The upper edge of the wiper blade should be 30 mm from the left side of the glass seal.
Rear window wiper motor (3): 1 - wiring; 2-wire connecting to the "ground"; 4 - engine bracket; 5 - windscreen wiper support with rod system.
Visitor comments