(1) toothed belt.
(2) Double belt pulley.
(3) Cooling pump V-belt. Check the tension by hand, the deflection should be 5-10 mm.
(4) Generator V-belt. Check the tension by hand, the deflection should be 10-15 mm.
(5) Tension roller. Set the belt tension. To tension, turn to the right.
(6) Fuel pump wheel. Remove.
(7) inter-shaft wheel.
(8) toothed belt wheel.
(9) Hexagonal bolt M12xl,5 — 150 nm. Hexagonal bolt M14x1,5 —180 nm. Lubricated bolt, install on locking elements. Models from 3.88: twelve-sided bolt M14x1,5; tightening torque 90 Nm + 1/2 turn, constantly replace. In a turbodiesel with air conditioning and a generator, a hexagonal bolt is installed instead of a twelve-sided bolt. Constantly replace the bolt; tightening torque + 1/2 turn.
(10) fuel pump.
(11) console.
(12) spacer washers. Adjust the tension of the V-belt by installing more or less washers.
(13) cooling pump
Visitor comments