The oil level is sufficient if the gearbox housing is filled to the lower edge of the oil filler hole. Screw in the plug "arrow" with a new sealing ring and tighten it to a torque of 45 Nm. When filling the housing after the oil has been completely drained, observe the following instructions: Unscrew the plug "arrow". Add transmission oil to the lower edge of the filler hole. Screw in the plug "arrow" with a new sealing ring and tighten it to a torque of 45 Nm. Install the noise-insulating casing on the gearbox, if there was one. Install the noise-insulating casing under the power unit.
(The original can be found at: VWmanual)
Visitor comments