Diesel engine ATD / AXR / ASZ with a displacement of 1.9 liters with a power of 74/96 kW (100/130 hp)
1 — the top casing of a gear belt
2 - toothed belt
Mark the direction of travel on the belt before removing.
3 - nut, 20 Nm + 45° (⅛ turnover) in tightening direction
4 - tension roller
5 - bolt, 100 Nm
6 - bolt, 25 Nm
7 - camshaft gear
8 - hub
With sensor ring. Use the holder and puller to loosen and tighten.
9 - bolt, 10 Nm
Always replace.
10 - rear protective screen of the toothed belt
11 - sealing insert
Replace if damaged.
12 - guide roller
13 - coolant pump
14 - crankshaft gear
15 — bolt, 120 Nm + 90° (¼ turn) in tightening direction
16 - bolt, 15 Nm
17 - nut, 20 Nm
18 — the bottom casing of a gear belt
19 — a belt pulley of a cranked shaft
Mounting is only possible in one position, because the centering holes are offset.
20 - bolt, 10 Nm + 90° (¼ turn) in tightening direction
21 — an average casing of a gear belt
22 - bolt, 45 Nm
23 - engine bracket
Visitor comments