Attention: When installing the engine cover, namely when fixing it at the attachment points, do not use brute force and do not use a tool. Otherwise, the engine cover may be damaged.
Removing
Pic. 2.1. oil dipstick
Remove oil dipstick 1 (pic. 2.1).
Pic. 2.2. Plug and hose connection
Disconnect plug C and hose connection B (pic. 2.2).
Loosen clamp A and remove the hose.
Unlock the engine cover at the attachment points and remove it upwards.
Installation
Position the engine cover by inserting the latches at the attachment points 2 and press it until the latches click into place.
Connect plug C and hose connection B.
Fit the hose and tighten clamp B.
Insert the oil dipstick into the guide tube.
Visitor comments