Fore and aft seat adjustment
Pic. 1.51. Driver's seat adjustment diagram
Pull the handle up and slide the seat. Then release the handle and move the seat a little more until the latch is released (pic. 1.51).
Attention: For safety reasons, the driver's seat must only be adjusted longitudinally when the vehicle is stationary.
Lumbar support adjustment
When the handwheel is turned, the part of the seat back in the lumbar region becomes more or less arched. In this way, you should find the most favorable position for the support of the spinal column, which will avoid fatigue during long trips.
Seat back tilt adjustment
Lean back and turn the handwheel.
Caution: The seat back must not be tilted too far back while driving, as this significantly reduces the effectiveness of the seat belts.
Seat height adjustment
«pumping up» up and down movements of the handles on the outside of the seat raise or lower the seat.
Lifting: pull the handle up from the starting position and do «pumping up» movement.
Lowering: push the handle down from the starting position and do «pumping up» movement.
Visitor comments