Contents: Fixing the cover ↓ Folding the cover ↓
The long luggage cover can be loaded from the trunk side.
Open the trunk lid and clear the middle of the trunk of any luggage items.
Fig. 1.62. The cover in the folded state
Press the device lid release key to load the cover in the trunk (see arrow in figure 1.62) and fold the lid down.
Fold forward the center armrest in the rear of the cabin.
Press the release button on the cover of the device for loading the cover in the passenger compartment downwards and fold the cover outwards.
Remove the cover and unfold it.
Remove the seat belt tongue from the holder on the cover.
Slide skis or other long objects through the trunk into the passenger compartment.
Fixing the cover
Once loaded, the cover should be securely fastened.
Fig. 1.63. Unfolding the cover
If the vehicle is equipped with a three-point center seat belt, there is a fastening strap on the cover. The cover must be fastened as shown in Figure 1.63.
Insert the fastening strap A of the cover into the buckle of the middle seat belt B.
Pull the belt tightly by the free end C.
Folding the cover
Close the boot lid in the trunk.
Carefully fold and pack the cover.
Insert the tongue of the fastening strap into the holder on the lid.
Close the lid in the cabin.
Visitor comments