Location of the oil filler plug on the 01N gearbox
The location of the oil filler plug on the gearbox 01V
To check the oil level in an automatic 4-speed gearbox 01N (in combination with a 4-cylinder engine, except for engines with a capacity of 150 hp) A 12mm hexagon must be used.
For checking the oil level in an automatic 4-speed gearbox 01V in combination with a 150 hp 4-cylinder engine. With. a new seal must be used for the oil filler screw.
Warning: If, when checking the level in the final drive of the gearbox, it is found that the oil in the final drive is too much or too little, then the oil is exchanged with the planetary gearbox. In this case, it is necessary to contact a VW workshop for troubleshooting.
Order of execution
1. Place the vehicle on a lift in a horizontal position.
2. Remove the lower engine mudguard.
3. Unscrew the oil filler plug from the gearbox.
4. Check the oil level. The oil level is correct when it is at the lower edge of the threaded hole.
5. Screw in the oil filler plug and tighten it to 25 Nm on gearbox 01N and to 30 Nm on gearbox 01V, see fig. The location of the oil filler plug on the gearbox 01N and fig. The location of the oil filler plug on the 01V gearbox.
6. Install the lower engine mudguard.
Visitor comments