Removing
Disconnect ground wire from battery.
Disconnect the hoses from the fuel filter, having previously bitten the terminal clamps with side cutters, remove the filter.
Installation
Insert new filter.
Attention: The arrow on the filter must point in the direction of fuel flow, i.e. towards the fuel pump.
Put on the fuel hoses and secure them with clamps tightened with screws.
Connect ground wire to battery.
Checking the carburetor
Clean the carburetor joints and throttle rods and lubricate them with MoS grease2.
Check the operation of the intake air heater.
Check the engine speed when idling and the CO content.
Visitor comments