Front brake caliper Ate/Teves (cars with engines of 150, 174 hp from 10/93) (VW Passat B3)

• 1 - Phillips head screw
• 2 - brake disc Always replace both discs of one axle
• 3 - Brake linings It is necessary to replace all linings of one bridge. The wear limit is 7 mm, including the back side
• 4 - retaining spring
• 5 - brake shield

As a spare part, it is manufactured together with guide pins and protective caps and is supplied with the required amount of grease for the guide pins. If the protective caps are damaged, the entire repair kit is used. The enclosed tube of grease is used to treat the guide pins.

• 6 — caliper body
• 7 - guide pin, 25 Nm
• 8 - protective cap
• 9 - sealing ring
• 10 - brake hose
• 11 - hollow bolt, 30 Nm
• 12 - ribbed head bolt, 125 Nm
• 13 — wheel hub bearing housing
• 14 - Allen bolt, 10 Nm
• 15 — rotation speed sensor

Only for vehicles with ABS. Insert the sensor with solid lubricant VW-G000650.

• 16 - protective cover
• 17 — bolt, 10 Nm
• 18 — rotor for speed sensor

Only for vehicles with ABS.

• 19 — wheel hub
• 20 - countersunk head screw

(The original text is available on the website: www.VWmanual.ru)