Withdrawal brake caliper in the following order:
- loosen the front wheel bolts, put the front of the car on a support and remove the wheels;
- remove the brake pads and tie the brake caliper to the body with a piece of wire;
- if necessary, disconnect the brake hose from the cylinder body;
- Remove the upper and lower bolts securing the brake caliper to the steering knuckle.
Installation brake caliper in the reverse order of removal, while:
- tighten the bolts of the brake caliper to the steering knuckle with a torque of 200 Nm;
- make sure that the brake hose is not twisted or bent and does not touch the car parts;
- after installing the brake caliper, restore the level in the reservoir and bleed the hydraulic drive system.
Visitor comments