Diesel engine lubrication system Volkswagen Sharan 1

Diesel Engine Lubrication System — General Information
The engine is lubricated by oil circulating under pressure. The gear pump is located at the bottom of the crankcase. The oil cooler is installed under the oil filter. The oil...

Removal and installation the oil pan
The oil pan can be removed with the engine installed. Drain the engine oil. Remove the crankcase guard. Unscrew the oil pan and remove the pan gasket if it remains on it. Fig....

Removal and installation the oil pump
Fig. 452. View of the oil sump and disassembled oil pump: 1 - guide plate; 2 - oil intake pipe; 3 - oil intake pipe bolt, 10 Nm; 4 - sealing ring, 10 Nm; 5 - oil pump housing; 6 -...

Oil pump repair
Fig. 452. View of the oil sump and disassembled oil pump: 1 - guide plate; 2 - oil intake pipe; 3 - oil intake pipe bolt, 10 Nm; 4 - sealing ring, 10 Nm; 5 - oil pump housing; 6 -...

Oil filter — removal and installation
According to the regulations, the oil filter should be changed at every oil change. Since the oil filter is located in the main flow of the flowing oil, i.e. all the oil necessary...

Checking oil pressure and replacing it
The engine oil pressure can be checked using a pressure gauge with an adapter that can be screwed in place of the oil pressure switch. The engine has a second oil pressure switch...

Oil radiator — removal and installation
On a vehicle with a diesel engine, the oil cooler is located between the oil filter and its base. The oil is cooled by the coolant passing through the oil cooler. The advantage of...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian