Gasoline engine lubrication system Volkswagen Sharan 1

Engine lubrication system — design description
The engine lubrication system serves to supply oil to all rubbing parts of the engine during its operation, as a result of which power losses due to friction between parts are...

Removal and installation the oil pan
The oil pan can be removed from the engine installed on the vehicle. Removal of the oil pan is carried out in the following order: Fig. 166. Lubrication system of the 2.0-liter...

Removal and installation the oil pump
Engine 2.0 l To remove the oil pump of a 2.0-liter engine, perform the following procedure: place the front of the vehicle on jack stands to gain access to the oil pan and oil...

Oil pump repair
Fig. 166. Lubrication system of the 2.0-liter engine: 1 - gasket, replace with a new one; 2 - oil filler cap; 3 - dipstick for checking the oil level; 4 - oil level dipstick guide...

Oil filter — removal and installation
Oil filters are used to clean the oil from mechanical impurities. They should be replaced either in accordance with the recommendations provided in the vehicle's operating manual...

Checking oil pressure
You need to know the following: Fig. 166. Lubrication system of the 2.0-liter engine: 1 - gasket, replace with a new one; 2 - oil filler cap; 3 - dipstick for checking the oil...

Oil radiator — removal and installation
When the engine is running, the temperature of the crankcase oil should not increase significantly to avoid a drop in its viscosity. Partial cooling of the oil occurs in the...

Engine oil change
Motor oil is supplied to all rubbing parts of the engine during its operation, as a result of which power losses due to friction between parts are reduced and wear of rubbing...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian