Removing
Remove inner and outer triangular trim. If necessary, remove the outside mirror.
Remove the outer seal of the window shaft from the flange.
Remove the inner window glass guide from the rim.
Use a large screwdriver to press the outer window guide out of the rim. Start pressing from the back top corner.
Installation
First insert the window glass guide into the front and rear of the shaft.
Push the guide down and, starting from the upper corners, push it onto the flange.
Caution: The retaining lip must be fully engaged when doing this.
Fit the inner window guide and the outer seal of the window shaft onto the rim.
Install both triangular trims.
Visitor comments