Required consumables: replacement filter element.
The cabin filter is located under the instrument panel.
Golf
Removing
1. Unscrew the fasteners A and remove the noise reduction pad B (see illustration).
Attention! Instead of threaded fasteners A, type C or D type fasteners can be installed (see illustration 27.1).
2. Unscrew screws A, if present (see illustration).
Attention! Screws A are not available on all models. With their help, additional fastening of the cover B is carried out if the clamps D do not ensure the proper fit of the cover (see illustration 27.2).
3. Slide cover B in the direction of arrow C and remove it (see illustration 27.2).
4. Remove filter element A from housing B (see illustration).
5. Clean filter housing B from the inside (see illustration 27.4).
The filter is installed in the reverse order of removal.
Touran
Removing
6. Remove trims 1 and 2 (see illustration).
7. Remove cover 3 by moving it in the direction of the arrow (see illustration 27.6).
8. Remove the filter element from the housing and install a new one.
The installation of the removed parts is carried out in the reverse order of removal.
Sunroof - cleaning and lubricating the rails
Special adaptations and tools are not required.
Required consumables: special grease VW-G OOO450 02.
9. Open the sunroof and wipe its guides (see arrows in illustration).
Attention! Cover the surface of the roof adjacent to the hatch with newspapers so that grease does not get on the paintwork. Remove spilled grease.
10. Lubricate the guides with special grease VW-G 000 450 02.
If in rainy weather or when washing the car, water enters the passenger compartment through the hatch, then contact the workshop to eliminate the defect.
Door stoppers - lubrication
Special adaptations and tools are not required.
Required consumables: special grease VW-G 000 150.
11. Lubricate the door opening limiters in the places indicated by the arrows with grease VW-G 000 150 (see illustration).
Visitor comments