Attention! At every second shutdown, the cleaner motor is set to the parking position, which ensures that the working edge of the brushes is rotated in the opposite direction.
The electric motor after turning off is set to the parking position, and then slightly shifts the brushes up.
This motor stroke cannot be used to adjust or check the wiper crank.
The starting position of the motor is used for testing.
If necessary, the glass cleaner switch can be pressed again.
Front glass cleaner. Golf Cars
1. Set the wiper to the park position.
2. Turn off the ignition.
3. Measure the distance between the rubber band of the brushes and the windshield seal (see illustration).
Nominal dimensions: Distance a/b = 0-10 mm.
If necessary, remove the brush holders and straighten their position.
Rear window cleaner. Golf Cars
Examination
4. Place the wiper in the park position by turning it on and off.
5. Measure the distance between the rubber band of the brush and the lower edge of the rear window (see illustration).
Nominal dimensions: Distance a = 15+5 mm.
If necessary, remove the brush holder and straighten its position.
Front glass cleaner. Touran cars
6. Place the wiper in the park position by turning it on and off.
7. Measure the distance between the rubber band of the brush and the top edge of the fairing box (see illustration).
Nominal dimensions:
- Distance A = 60 mm;
- Distance B = 16 mm.
If necessary, remove the brush holders and straighten their position.
Rear window cleaner. Touran cars
Examination
8. Place the wiper in the park position by turning it on and off.
9. Measure the distance between the rubber band of the brush and the lower edge of the rear window (see illustration).
Nominal dimensions: Distance a = 25 mm.
If necessary, remove the brush holder and straighten its position.
Visitor comments