Removing
1. Turn off the ignition and remove the key from the lock.
2. Remove an internal rear-view mirror, the corresponding chapter see.
3. Disconnect plug 1 of rain sensor 2 (see illustration).
4 Pry off the rain sensor 2 with a screwdriver and remove it from the holder 3 (see illustration 20.3). Make sure that the sensor cover is not removed when removing.
Installation
Installation is carried out in the reverse order of removal.
The windshield in the place of mounting and fit of the sensor must be clean.
The formation of air bubbles in the place where the sensor is attached to the windshield is not allowed.
Visitor comments