Rear disc brakes (VW Golf 5)

4.0. Rear disc brakes
1 - ABS sensor. Before installing the sensor, clean the hole and lubricate it with high-temperature grease, such as Liqui Moly ceramic paste
2 - Hexagon socket head bolt. Tightening torque 8 Nm
3 - brake shoe guide mounting bolts*. The bolts are self-locking. The bolts are tightened with a force of 90 Nm and then turned by 90°.
A - steering knuckle
5 - protective cover
6 - bolts Tightening torque 9 Nm
7 - hub and hub bearing with ABS sensor gear
8 - brake disc. When replacing, new brake discs should be installed on both wheels
9 - brake disc lock bolt. Tightening torque 4 Nm
10 - hub bolt*. Self-locking. The bolt is tightened with a force of 180 Nm, followed by a further turn of 180°
11 - brake pads When replacing the pads, it is imperative to install new pads on both brake mechanisms
12 - shoe guide with mounting bolts to the steering knuckle
13 - support
14 - Brake hose holder
15 - Brake hose with hollow bolt Tightening torque 14 Nm
16 - caliper mounting bolts are self-locking. Tightening torque 35 Nm
17 - Parking brake cable
18 - Parking brake cable holder
19 - brake hose
20 - brake shoe pressure springs. Replaced when installing new shoes.
* must be replaced after each dismantling