2. Clean the brake pads and the brake mechanism with a soft metal brush or a rag soaked in gasoline.
Attention! Do not inhale brake dust!
3. Apply paste "Plastilube" or heat-resistant grease, such as: "Liqui Moly LM-508-ASC" to the following places:
- all accessible places of the rear parts of the brake shoe plates;
- the end part of the pistons;
- contact surface of brake bearings;
- sliding surfaces of brake mechanisms (saddles).
Attention! Grease must not get on the friction surface of the brake disc or brake pads. If possible, remove the remaining grease with a rag, if necessary, clean with gasoline.
4. Install brake pads.
Visitor comments