Golf Cars
Removing
1. Remove the glass cleaner brush holders.
2. Remove the sealing rubber 4 from the protrusion of the fairing 2 (see illustration).
40.2. Fairing grille - removal and installation. Golf Cars
1 - fairing grille
2 - fairing
3 - windshield
4 - sealing gasket
5 - mount
3. Carefully push the grill up and out of the bracket 5 (see illustration 40.2). The grille should be removed first by the right end.
Attention! It is not allowed to detach the grill from the windshield 3 using a plastic wedge (see illustration 40.2).
Installation
4. Moisten mount 5 with soapy water (see illustration 40.2). This will make it easier to install the fairing grille.
5. Place the grille on the mount, and then, working from the middle towards the edges of the grille, gently push it down until it sits in the mount.
6. Lay seal 4 on fairing lug (see illustration 40.2).
7. Replace the glass cleaner brush holders.
Touran cars
Removing
8. Remove the glass cleaner brush holders.
9. Remove the sealing rubber 4 from the protrusion of the fairing 3 (see illustration).
40.9. Fairing grille - removal and installation. Touran cars
1 - fairing grille
2 - wind flow
3 - fairing
4 - sealing gasket
5 - mount
10. Carefully push the grill up and out of the bracket 5 (see illustration 40.9).
The grille should be removed first by the right end.
Attention! It is not allowed to detach the grill from the windshield 2 using a plastic wedge (see illustration 40.9).
Installation
11. Moisten mount 5 with soapy water (see illustration 40.9).
This will make it easier to install the fairing grille.
12. Place the grille on the mount, and then, working from the middle towards the edges of the grille, gently push it down until it sits in the mount.
13. Lay seal 4 on fairing lug (see illustration 40.9).
14. Reinstall the glass cleaner brush holders.
Visitor comments