1 - fairing grille
Withdrawal
- Remove wiper arms.
- Remove seal -2- along the entire length of the drainage cover.
- Use a plastic wedge, eg HAZET 1965-20, to press the fairing grille on the right and left of the plate -3- from the rebate.
- Carefully pull cowl grille out of receiver -5- starting from right side -arrow A- upwards.
Installation
- Moisten the area at the receiver -5- with soapy water. This makes it easier to fit the fairing grille into the receiver.
- Attach the fairing grille to the receiver and then, starting from the middle -arrow B-, press it into the receiver from both sides.
- Press plates -3- back.
- Place seal -2- and press against plenum cover.
- Install wiper arms.
2 - seal
3 - plate
4 - windshield
5 - receiver
Visitor comments