After turning on the ignition, the unit usually starts to work in automatic mode. Readings 2, 3, 7 and 8 appear in the display fields (see fig. Climate Controls "Climatronic").
The unit fully automatically maintains the set temperature inside the vehicle. To do this, the temperature of the air supplied to the cabin, the fan speed are automatically changed (air supply) and distribution of the supplied air.
Automatic adjustment of the installation operation is provided for when solar radiation increases, so any manual adjustment of the heating is unnecessary.
If some deviations from the standard parameters of the automatic mode of operation of the unit were introduced before the ignition was switched off, the newly set parameters by the unit are stored for a long time. Only 20 minutes after the ignition is turned off, the previously set recirculation mode is erased from the memory.
Switching from Celsius to Fahrenheit and vice versa
Press and hold the 17 key, then press the 9 key.
The measured value of the temperature in the relevant system will appear on the display.
Visitor comments