Contents: Removal ↓ Installation ↓
The headlight range control actuator motor can only be removed from a headlight that has been removed from the vehicle.
Removal
1. Remove the headlight.
2. Remove the cover from the low beam lamp.
3. Disconnect the electrical connector from the headlight range control actuator motor.
4. To release the headlight corrector actuator motor on the left headlight from its retainer, turn it counterclockwise.
5. To release the headlight corrector actuator motor on the right headlight from the lock, turn it clockwise.
6. Remove the headlight corrector actuator motor, while moving it to the side, remove the spherical head of the corrector pusher from the clamp on the headlight reflector.
Installation
1. Lock the reflector from turning through the high beam bulb installation hole and insert the spherical head of the headlight corrector pusher into the clamp on the reflector.
2. Turn in the direction opposite to removal and secure the headlight range control actuator motor.
3. Connect the electrical connector to the headlight range control actuator motor.
(The article is published on this resource: VWmanual.ru)
4. Install the low beam lamp cover.
5. Install the headlight.
Visitor comments