Removal and installation the instrument cluster (VW Golf 4)

Location of electrical connectors on the rear of the instrument cluster

• 1 - 32-pin green electrical connector;
• 2 - 20-pin red electrical connector;
• 3 - device for fixing electrical wiring;
• 4 - sound signaling of oil pressure and light on;
• 5 - indicator lamp for operation of a vehicle with a trailer 1.12 W;
• 6 - 32-pin electrical connector blue

Warning: Only the indicator bulbs may be replaced in the instrument cluster. If one of the indicators fails or if there is any other defect, the instrument cluster must be replaced as a whole.

Removal

1. Move the steering column to the lower position and remove the steering wheel.



2. Release the lower instrument cluster trim (1) from the spring clips and remove it through the upper steering column cover (2).





3. Remove the two screws securing the lower portion of the instrument cluster.

4. Move the instrument cluster forward and disconnect the electrical connectors from the back of the instrument cluster.

5. Replace the bulbs if necessary.

Installation

1. Installation is carried out in the reverse order of removal.

[The original can be found at VWMANUAL]

2. If a new instrument cluster is installed, adjust the Service indicator and odometer readings.