Elements of fastening of the upper upholstery of the rear door
- 1 - upper upholstery of the rear door;
- 2 - back door;
- 3 - guide bolts 4 pcs.;
- 4 - spring clips 2 pcs.;
- 5 - spacer piston 2 pcs.;
- 6 - spacer pin for spacer piston 2 pcs.;
- 7 - clamps 4 pcs.
Removing
1. Remove the bottom facing of a back door.
2. Remove the spacer pin from both sides of the door (6) from a spacer piston (5).
3. Pulling in the direction of the arrow (A), release the top upholstery of the rear door from the spring clips on both sides.
4. pulling down (arrow B), release the top of the tailgate trim from the spring clips and remove it from the vehicle.
Installation
1. Check the condition of the spring clips before installing the tailgate trim (4 and 7) and, if necessary, replace them.
2. Installation is made in sequence, return to removal.
Visitor comments