1 - headlight
2 - servomotor for adjusting the lighting range
3 - parking light bulb socket
4 - headlight bulb
5 - mounting clamp
6 - cap
7 - parking light lamp
From the engine section side, grasp the protective cap and turn it slightly to the left in the direction indicated by the arrow to remove it.
Pull the plug out of the headlight bulb socket 5. Lift the retaining clip 2 over both projections 3 and pull the bulb out of the headlight socket.
Do not touch the new bulb with bare hands. Insert the bulb so that the socket protrusions fit into the reflector grooves. After replacing the headlight bulb, always check the headlight adjustment and adjust them if necessary. We recommend that you have the headlight adjustment checked at a workshop; they have the necessary optical adjustment devices. Only with their help can you ideally adjust the high and low beams so as not to create dangerous situations on the road.
Visitor comments