1Fog lights are built into the car's bumper below the headlights. To remove the fog lamp, remove the towing eye cover and remove both Phillips screws 1. Remove from the bumper and unplug the plug from the rear.
Installation is carried out in the reverse order of dismantling. To adjust the length of the light beams, turn adjusting screw 2 to the left. Lateral adjustment is not possible.
To replace the fog light bulb, turn the cover to the left at the rear and remove it. On the inside of the cap, pull the plug out of the plug tongue. Press on the spring clip located in the headlight above the tabs and remove the bulb from the headlight, do not touch the bulb with bare hands
The lamp is mounted in the reverse order to dismantling. The notches in the lamp socket must line up with the guides in the lamp housing.
Visitor comments