1 - lamp cover
2 - seal
3 - incandescent lamp, reversing light, 21 W
4 - Incandescent lamp, direction indicator, 21 W
5 - lamp socket
6 - Incandescent lamp, rear light, 110 W
7 - Incandescent lamp, brake light, 21 W
8 - nut M5
After unscrewing the lamp cover and removing the seal, the lamps can be replaced as needed. The lamps are oriented according to the protrusions in the base; in this position they need to be inserted into the socket. Once again, note that you cannot touch the lamps with bare hands, otherwise stains may appear on them. Note the high power of the lamp.
[The article is posted on this website: vwmanual.ru]
Visitor comments