Pic. 454. Front wiper drive (engine 1.3 l): 1, 8, 14 - spacer rings; 2. 10, 15 - gaskets (washers); 3 - left traction; 4 - right thrust; 5 - bolt M6; 6 - leash of the right wiper lever; 7 - nut M16; 9 - rubber bushing; 10 - washer; 11, 17 - wiper arm shaft; 12 - wiper motor; 13 - bracket; 16 - bolt; 18 - spring washer; 19 - shaft sleeve; 20 - washer; 21 - lock washer; 22 - wiper relay
Pic. 455. Rear wiper drive: 1 - brush; 2 - shaft; 3 - thrust; 4 - wiper motor; 5 - cranked lever; 6 - washer tank; 7 - washer pump; 8 - nut (7 Nm); 9 - nozzle; 10 - nut (9 Nm); 11 - decorative overlay; 12 - wiper leash
Before removing the wiper arms, note the position of the wiper blades so that they retain their previous position during installation. The wiper motor can be removed without the bracket. To be able to dismantle the engine, remove the crank arm by unscrewing its fastening nut. Before installing the motor, connect the wires and start the motor so that it makes two revolutions. Turn off the engine in the initial position, put the crank arm on the shaft, and then fix it.
Visitor comments