Cylinder head of 4-cylinder petrol engine
1. Upper casing of the toothed belt; 2. Mounting bolt, 80 Nm; 3. Camshaft gear; 4. Bolt, 40 Nm; 5. Lower casing of the toothed belt; 6. Spring washer; 7. Intake manifold; 8. Cylinder head cover gasket; 9. Cone; 10. Threaded cap; 11. Oil filler neck; 12. To the intake hose; 13. Pressure control valve for crankcase ventilation; 14. O-ring; 15. Reinforcing bar; 16. Cylinder head cover; 17. Oil separator; 18. Cylinder head bolt; 19. Cylinder head; 20. Coolant temperature sensor; 21. Thermal switch sensor; 22. Locking bracket; 23. Generator bracket; 24. Bolt, 25 Nm; 25. Cylinder head gasket; 26. Tension roller; 27. Nut, 45 Nm; 28. Toothed belt
Cylinder head of 4-cylinder diesel engine
1. Threaded plug; 2. Filler neck; 3. To the downpipe; 4. Protective cap; 5. Nut, 10 Nm; 6. Belleville washer; 7. Top sealing washer; 8. Cylinder head cover; 9. Engine crankcase ventilation.; 10. Cylinder head cover gasket; 11. Cylinder head bolts; 12. Lower sealing cone; 13. Injection pipelines. Tightening torque: 25 Nm; 14. Cylinder head; 15. Cylinder head gasket
Cylinder head of 5-cylinder petrol engine
1. Threaded cap; 2. Filler neck; 3. Protective cap; 4. Nut, 10 Nm; 5. To the inlet hose. Attach the outlet hose with bracket to the oil filler neck. Pay attention to a sufficient distance from the throttle valve fitting; 6. Pressure control valve for crankcase ventilation; 7. O-ring; 8. Cylinder head cover; 9. Belleville washer; 10. Top sealing washer; 11. Cylinder head cover gaskets; 12. Cylinder head bolt; 13. Bolt, 15 Nm; 14. Ignition distributor; 15. Ring; 16. Coolant temperature sensor; 17. Cylinder head; 18. Locking clip; 19. Coolant circulation thermostat and coolant temperature sensor; 20. Cylinder head gasket; 21. Upper casing of the toothed belt; 22. Camshaft gear; 23. A bolt of fastening of a cogwheel of a cam-shaft. For the tightening torque, pay attention to the designation of the steel of the screw on the bolt head: bolt 8.8–85 Nm; bolt 10.9–120 Nm. For unscrewing and tightening, use the VW-3036 counterholder; 24. Toothed belt; 25. Rear casing of the toothed belt; 26. Key; 27. To branch coolant expansion tank; 28. Intake manifold
Visitor comments