Contents: Removal ↓ Installation ↓
Illumination in the side mirror to facilitate the landing of the driver's side or illumination in the side mirror to facilitate the landing of the front passenger's side is installed in the body of the left or right side mirror.
Note: It is not necessary to remove the side mirror to remove/install the lighting.
Note: Removal and installation of the turn signal lamp in the right and left side mirrors is the same, so the description is given only for one side.
Removal
Turn off the ignition and all electrical consumers and turn the key to position 0 (preliminary stop).
View the original article on the resource: VWManual
Note: Put the ignition key of the remote control in the vehicle interior during removal and installation to avoid locking the doors and self-activation of the functions "Coming Home/ Leaving Home (Arriving Home/ Leaving Home)".
Fig. 7.82. Folding out the side mirror
Fold side mirror 1 forward in the direction of the arrow (Fig. 7.82).
Fig. 7.83. Fastening bolt
Unscrew the fastening bolt 1 (Fig. 7.83).
Fig. 7.84. Removing the backlight
Unlock and remove the light from the side mirror in the direction of the arrow, taking into account the length of the connected cables (Fig. 7.84).
Fig. 7.85. Removing the cartridge from the backlight housing
Remove cartridge 2 in the direction of the arrow from the backlight housing 1 (Fig. 7.85).
Replacing the lamp
Fig. 7.86. Removing the lamp
Remove lamp 1 in the direction of the arrow from socket 2 (Fig. 7.86).
Socket lamp 12V, 6W
Installation
Installation is carried out in the reverse order, taking into account the following.
Note: After installation, check the operation of the side mirrors.
Visitor comments