Replace brushes that have hardened, cracked, or silicone coated rubber bands.
Removing
1. Raise the wiper arm away from the windshield. Rotate the wiper blade 90°to the wiper arm.
2. Press the wiper blade latch (arrow A), then move the brush along the lever (arrow B) and, moving it in the opposite direction, remove it from the wiper arm.
3. On both sides, squeeze the steel reinforcements of the wiper rubber band and remove the wiper rubber band from the end of the brush.
Installation
The location of the notch of the retainer on the rubber band of the wiper blade
1. Insert a new rubber band without steel reinforcements into the lower clips of the wiper blade.
2. Insert the steel reinforcements into the first groove of the rubber band.
3. Using pliers, squeeze the steel reinforcements together with the rubber band and insert them into the upper clip of the wiper blade. In this case, the clamp antennae must enter the clamps on the rubber band, see fig. The location of the notch of the retainer on the rubber band of the wiper blade.
4. Establish brushes of a screen wiper on levers in sequence, return to removal. In this case, the latch should clearly fix the brush on the wiper arm.
5. Lower the wiper arm to the windshield.
Visitor comments