Roof Guard/Curb on Station Wagon
- 1 - roof railing,
- 2 - nut, 20 Nm,
- 3 - conical washer,
- 4 - central cap,
- 5 - rear cap,
- 6 - mounting bracket,
- 7 - bolt, 20 Nm,
- 8 - nut,
- 9 - sealing ring,
- 10 - gaskets,
- 11 - front cap
Removing
1. Remove the front, center and rear caps.
2. Unscrew the nuts securing the guard (2).
3. Remove conical washers (3).
4. Remove the roof railing from the mounting brackets.
Installation
1. Align the tabs on the cap with the holes in the roof guard and push them in until they lock into place.
2. Place the mounting bracket on the cover and center the hole in the roof.
3. Screw the mounting bracket to the roof, tightening the lower mounting bolt first.
4. Install and screw on the roof railing.
5. Install the front, center and rear caps.
sedan models
Roof guard/curb on Sedan model
- 1 - curb strip,
- 2 - gutter,
- 3 - windshield,
- 4 - rear window
Removing
Using a flat plastic wedge, starting at the side of the windshield, remove the curb strip from the roof gutter.
Installation
Starting at the rear of the vehicle, lay the curb strip into the roof groove and press the curb strip firmly into place in the roof groove.
Visitor comments