Removing
1. Turn the wiper on and then off until the wiper arm is in its original position.
2. On the windshield wiper, unscrew the cover at the base of the wiper arm.
3. On the rear window wiper, move up the cover located at the base of the wiper arm. Loosen the wiper arm nut a few turns.
4. While moving the wiper arm to the sides, loosen its fit on the axle, then unscrew the nut and remove the wiper arm.
Installation
Starting position of the wiper blade
- Front glass wiper A = 20 mm.
- Rear window wiper A = 20–30 mm.
1. Set the wiper arm in such a position that the windshield wiper blade is located 20 mm from the windshield, see fig. The initial position of the wiper blade. Install the rear window wiper arm so that the wiper blade is 20–30 mm above the lower edge of the glass. Secure the wiper arm with the nut, tightening it to 15 Nm.
2. Reinstall the lower wiper arm cover.
3. Check the angle of the wiper arm and adjust if necessary.
Visitor comments