Contents: Removal ↓ Installation ↓
Car models up to 9/93
Removal
Remove the rim "2". To do this, carefully use a narrow screwdriver to pull the expansion rivet "4" out of the clamp "3".
Pull out clamp "3" and remove the rim from the bumper cover "1".
Unscrew the mounting screws "1" and remove the headlight.
2 — adjusting screw for repositioning the fog lamp in height. Repositioning the lamp in the horizontal plane is not possible.
Remove cover "E".
Disconnect the "F" plug connector.
Disconnect the ground wire.
Remove the fog light.
Installation
Attach the fog lamp and screw it in.
Connect the electrical wires.
Place the rim, secure with clamps and fasten them with expansion rivets.
Check the adjustment of the fog lights.
Visitor comments