Removing
Remove the double-filament bulb cover from the main headlight.
Disconnect the headlight beam throw control circuit plug.
By turning to the left at the left and by turning to the right at the right headlight, unfasten the actuator from the carrier frame and, applying sufficient force, pull it out of the retainer.
Installation
Push the actuator into the retainer until it is fully engaged. At the same time, in order to avoid destruction of the reflector, hold it by the double-filament incandescent lamp.
Attention: Do not touch the reflector from the inside.
Secure the actuator in its original position by screwing in.
Attach and secure the lid.
Connect the plug.
Visitor comments