Carefully press out lens -A-. To do this, insert a knife into the gap between the diffuser and the housing from the side. Take out the lamp.
Insert a new lamp, press the diffuser into the housing.
Attention: At the front lamp, the boss on the diffuser must fit into the recess on the left side of the housing.
At the rear light -B-, the projections on one long side of the lens must point downwards.
Reading lamp -С-
Squeeze out the interior lamp in the kit. To do this, insert a flat screwdriver between the roof lining and the light and turn.
Turn the white cartridge on the reverse side of the lamp to the left and pull it out. Insert a new lamp.
Insert the cartridge into the body and turn to the right until it stops.
Press the interior light into the roof lining.
Visitor comments