Camshaft
A four-way camshaft rotates on top of the cylinder head body.
Maximum axial displacement of the camshaft, no more than, mm: 0.15.
Valve timing (with a calculated zero clearance between the camshaft lobes and shims and a valve lift of 1 mm)
With the correct installation of the gas distribution mechanism, the label «ABOUT», corresponding to 8MT of the piston of the 1st cylinder on the crankshaft flywheel, must be aligned with the mark on the clutch housing, and the mark on the camshaft pulley must be opposite the upper plane of the cylinder head cover gasket.
Timing belt for camshaft drive
Make and type: Uniroyal Powergrip 41120x18mm.
The belt tension is considered normal if, in the middle part of the branch between the camshaft sprocket and the water pump, the belt is twisted no more than 90°by the force of the thumb and forefinger.
Visitor comments