Attention! Depending on the vehicle model, there may be an additional support ring between the compression buffer 4 and the protective tube 3.
12.0. Shock absorber
1 - gas-filled shock absorber
2 - protective cap
3 - protective tube
4 - compression stroke buffer
5 - upper shock absorber support
6 - shock absorber rod nut. Tightening torque 25 Nm. The nut must be replaced with a new one after each dismantling. When unscrewing and tightening the nut, hold the shock absorber rod from turning by its upper end
7 - top cover
The original information is posted on the resource: www.VWManual.ru
Visitor comments