To increase the capacity of the luggage compartment, the rear seat can be folded down; on vehicles with split rear seats, each of the two parts of the seat can be folded separately.
The rear head restraints must be removed before folding the seat.
Before folding the seat, in order to avoid damage to it, you should:
- install the front seats so that the back of the rear seat does not rest against the front seats;
- slide in the rear cupholder.
How to fold the rear bench seat
1. Raise the seat cushion slightly (arrow 1) and pull it forward until it stops. Then kick back the pillow (arrow 2).
2. Pull the release button located in the back of the seat (when seated undivided, pull both buttons simultaneously) in the direction of the arrow and tilt the backrest forward.
How to put the seat back
1. First, fold back into place.
2. Fold the cushion back into place and slide the cushion fully back. Then press the front of the seat cushion down until it locks into place. When doing this, keep the middle seat belt up high, otherwise the belt will be pinched between the backrest and the cushion and cannot be used.
3. Make sure that the seat belts are not pinched when the seat backs are folded down and thus damaged.
Visitor comments