1. Switch B (see figure Ventilation and heating controls) put it on the desired level.
2. Turn handle A counterclockwise until it stops.
3. Handle C on
4. If the windshield fogs up, turn the knob C to
5.Open nozzles 3 and 4.
6. If desired, handle C can also be set to another position.
In order for the interior heating and ventilation to work reliably, the fresh air intake opening located in front of the windshield must be kept free of ice, snow and leaves.
Only handles A and C can be set to any intermediate position.
To avoid fogging of the glass, at low vehicle speeds, switch B should be set to the lowest level of the fan mode, and switch C should be set to position
The heating capacity of the heating system depends on the temperature of the coolant in the engine cooling system – therefore, the greatest heating occurs when the engine is warmed up to operating temperature.
Used air is removed through outlets under the rear window. When placing items of clothing on the luggage compartment shelf, make sure that these openings are not blocked.

Visitor comments