Removing
Remove storage box. Remove screws -1- (1.4 Nm). Rotate fresh air/recirculation/air intake flap control motor -V425- -2- by approx. 15°in direction of arrow- and remove from air intake housing.
Unplug electrical connector -1- at fresh air/recirculation/air intake flap control motor -V425-.
Note: It is not allowed to change the position of the air intake damper.
Installation
Installation is carried out in the reverse order. The fresh air/recirculation/air intake motor -V425- can only be installed in one position due to its eccentric mounting.
Instructions: After installation, check the operation of the air intake and recirculation dampers. Using tester -VAS 5051B- (or subsequent medal) execute "basic installation".
Visitor comments