Operation of window lifts with ignition on (VW Golf 4)

Contents: Opening ↓ Closing ↓ Overload protection ↓

Opening

Switch in the driver's door

1. Front windows: Press the switch to the first detent. The window is opened manually. Briefly press the switch to the second detent. The window opens automatically (automatic full lowering of the glass). When the switch is pressed again, the glass stops immediately

2. Rear windows: Press the switch. The window opening is controlled manually.

Switch in the front passenger door

3. Press the bottom edge of the switch. The window opening is controlled manually.

Switches in the rear doors

4. Press the bottom edge of the switch. The window opening is controlled manually.

Closing

Warning: Inattentive or uncontrolled closing of windows may result in injury.

Switch in the driver's door

1. Front windows: Pull the switch to the first detent position. Window closing is controlled manually.

2. Pull the switch briefly to the second detent position. The window closes automatically (automatic full glass lift). When the switch is pressed again, the glass stops immediately.

3. Rear windows: Pull the switch. Window closing is controlled manually.

Switch in the front passenger door

4. Press the top edge of the switch. The window closing is controlled manually.

Switches in the rear doors

5.Press the top edge of the switch. The window closing is controlled manually.

Overload protection

If something prevents the glass from moving when closing the window of one of the front doors (overload protection tripped), the window immediately opens again.

After the window has opened, you should raise or press the switch of the corresponding window again within 5 seconds and hold it. If the window does not close due to difficulty moving the glass or due to the presence of any obstacle, the glass stops in an intermediate position

After the glass has stopped, you must press the switch again within 5 seconds to close the window. Now the window will close without overload protection.