For engine with manual transmission:
- Turn away fixing nuts and bolts.
- Take out the starter.
For engine with automatic transmission:
- Loosen the top center bolt.
- Disconnect the drive shaft from the starter side.
- Unscrew the lower bolt of the central fastening and remove the heat-insulating casing from behind.
- Disconnect wires from connectors «30» and «50».
- Turn the wheels fully to the right.
- Unscrew the casing bracket from the starter.
- Move the drive shaft back and up.
- Remove the starter from the bottom of the car, gear up.
The starter is installed in the reverse order.
Pay attention to the correct connection of the wires.
Visitor comments