Contents: Removal ↓ Installation ↓
Please note: The power window switches on the center console can be pulled forward if necessary.
Removal
Lower the window a little.
Remove the interior door trim.
Remove the protective film.
Unscrew the glass fastening and lower the glass into the door.
Disconnect connector 1 (figure 467), unscrew bolts 2 securing the electric window motor and bolts 3 securing the guide.
Figure 467. View of the door on which the electric window is installed: 1 - connector; 2 - electric window motor mounting bolts; 3 - guide rail mounting bolts
Remove the electric window assembly with the motor, cables, guide and electrical wires downwards.
Installation
Insert the electric window lift with the motor, cables and guide. The upper cable should pass under the guide.
Tighten the engine and guide mounting bolts. Connect the electrical wires.
Secure the door window glass.
Apply the protective film carefully.
Install the interior door trim.
Visitor comments