WARNING: Make sure that the coil spring is properly seated in the lugs -VAG 17S2/3A-2- (otherwise, an accident may occur).
To compress the spring, rotate the lead screw of the fixture with a wrench or ratchet wrench. Compress the coil spring until it can be removed. Remove spring.
- 1 - Capture -VAG 1752/ZA
- 2 - Adapter -VAG 1752/9
- 3 - Suspension spring compressor -VAG 1752/1-
Installation
The workpiece must be in the mounting position! The beginning of the spring -arrow- must rest against the stop of the lower spring seat. Install spring with gasket. At the bottom of the gasket is a cylindrical protrusion.
It must be inserted into the hole in the lower control arm -arrow-.
Then install the top gasket on top of the spring. Extend the grips of the spring compressor so that the notch on the upper spring spacer is aligned with the corresponding tab on the body. Remove the spring compressor. Install the wheel and tighten the wheel bolts.
Visitor comments