Removing
Remove wheel. Remove wheel arch liner. Remove coil spring. Remove bolts -arrows-.
Remove bolt -arrow-. Remove shock absorber.
Installation
Installation is carried out in the reverse order. The tightening of the shock absorber mounting bolts to the wheel bearing housing can only be done after the suspension is installed in a position corresponding to the size "A"! Install shock absorber and tighten bolts -arrows-. Tighten bolt -arrow-. Install coil spring. Install the wheel arch liner. Install the wheel and tighten the wheel bolts.
Tightening torques
Shock absorber to the body. Use only new bolts | 50 Nm and tighten by 45° |
Shock absorber to wheel bearing housing. Use only new bolt | 180 Nm |
Visitor comments